AUDIO OUTPUT

Press ENTER to change the AUDIO OUTPUT. The VCR can record a program in stereo. It can also be set to record the secondary Audio Program (SAP) of any broadcast with second language audio. The VCR records the same audio on both the Hi-Fi and linear tracks on the tape.

CHANNEL SETUP

When the VCR memorizes all the available channels, you can use CH/TRK to select channel. Select the CHANNEL SETUP using SHIFT and ENTER.

1.Setting the Source

Before the VCR can memorize available channels, you must set the signal source for your VCR, leave ANTENNA displayed in the ANT/CABLE screen. If you have a cable system hooked up to your VCR, press ENTER to change to

CABLE TV.

2.Auto Channel Memory

Select to activate the auto channel memory. Your VCR will begin scanning through available channels. To interrupt, press MENU on the remote control. When the channel number on screen stops changing, the VCR has finished.

3.Channel Add/delete

You can add or delete channels that have been memorized by the Automatic Channel Memory function. Press ENTER to add the selected channel. Press SHIFT to delete the selected channel.

NOTE: The Auto Channel Memory function must be performed before Channel Add/delete can be used.

VCR OUTPUT CH

VCR sends the output signals to channel 3 or 4 on your TV. Set the output channel on the menu to 3 CH or 4 CH, whichever is vacant in your area.

© 2001 Directed Electronics, Inc.

15