Install the DVD Player to the Dock
Note: Be sure to turn the power off before installing the shuttle.
a. Insert the bottom part of the DVD unit into the lower part of the docking station(4). Be sure lock tab (2) is moved to the right before inserting the DVD.
b. Center the DVD player in the docking station, Gently push the DVD player into the docking station, the two tabs (3) on the docking station, will latched with the DVD unit (Refer to the right picture above.) Once the units are docked lock tab (2) can be engaged by pushing it to the left, this will prevent the DVD from coming loose.
c. For getting a nice view, you can change the DVD angel
d. Removing the DVD unit from the docking station, just push the lock button (2) to the right side to unlock the cover, then press the release button (1), and tack out the DVD unit.
Mode Selection
Press SOURCE button on the docking station panel to change the mode.
TV Operation
1) Auto searching TV channels
Press AUTO button on remote control or on the docking station panel to start search channel automatically. In the course of searching, press CHbutton on the remote
© 2006 Directed | 33 |
