BASIC OPERATIONS
USING THE ON-SCREEN DISPLAY 
1 This DVD video player allows you to view the operational status and disc information on screen.
2 Press OSD button on the remote
control during playback. The disc
OSD
information will be displayed on screen.
3 Press OSD button again, the | 4 |
|
information will disappear.
USING THE USB PORT
1.If there is only an USB device connected without any disc loaded before turning on the DVD player, the USB device will be read directly after power on and vice versa.
2.If there are both a disc loaded and an USB device connected before the player's power on, there will be a prompt message displayed on screen to select media.
3.If a disc is playing prior to the USB device connecting, you have to press “STOP” twice to get the prompt message to select USB reading and vice versa.
READ DISC
READ USB
1. The player may not work properly if using USB connecting cable. USB devices should be connected directly to the port.
2 Support USB 1.1.
