DRY - do not allow water to drip or splash on the Inverter.
COOL - ambient air temperature should be between 50 and 80 F. Do not place the Inverter on or near a heating vent or any piece of equip- ment, which is generating heat above room temperature. Do not place the Inverter in direct sunlight.
VENTILATED - allow at least one inch of clearance around the Inverter for airflow. Do not place items on or over the Inverter during opera- tion. Make sure that air is allowed to circulate freely around the unit.
SAFE - do not use the Inverter near flammable materials or in any location which may accumulate flammable fumes or gases, such as the battery compartment of your car, truck, RV or boat.
Connecting to Power Source
Connection can also be made directly to the vehicle’s battery. In that case a 20 amp ATC fuse can be used (not supplied).
© 2006 Directed Electronics - all rights reserved | 13 |
