CONNECTION TO LOAD

Once you have determined the proper method of connection to the power source (cigarette lighter or direct to battery with adapter sock- et), connect the 150W Inverter accordingly, making sure to fully insert the plug into the appropriate socket. Now plug appliance(s) into the receptacle(s) on the Inverter and flip the rocker switch to the (ON) position. The green LED above it and slightly to the right will illumi- nate. Turn on your appliance(s) making sure the load requirements are within the parameters of the Inverter's output

If an audible alarm sounds, that means the power input voltage is too low.

At 9.5V, the PROT (protection) indicator LED will illuminate to red and the inverter will automatically shut down.

CAUTION: DO NOT CONNECT TO AC DISTRIBUTION WIRING

The Inverter is designed to be directly connected to standard electri- cal and electronic equipment in the fashion described above. Do not connect the Inverter to household or RV AC distribution wiring. Do not connect the Inverter to any AC load circuit in which the neutral conductor is connected to ground or to the negative of the DC (bat- tery) source.

16

© 2006 Directed Electronics - all rights reserved

Page 16
Image 16
Directed Video VDC301 manual Connection to Load