DirecTV D10 Turning Notification On or Off, Call Log, To access the call log, Deleting Calls

Using On-Screen Menus

Turning Notification On or Off

There are three ways you can turn Caller ID notification on or off:

•Select Turn Off Notices (or Turn On Notices if Notices have been turned off) from the Caller ID Quick Menu

•Select Off from the choice list for Notices in the Caller ID menu under the Service tab

•Select Disable Notification when a Caller ID alert appears

The Call Log

The DIRECTV® Receiver can store up to 10 call entries in the Call Log screen. When the memory is full, a new call automatically replaces the oldest call in memory.

To access the call log:

1.Press MENU on your remote control.

2.Use the up and down arrows to highlight Caller ID & Msgs. Press SELECT to select it.

3.Press SELECT with Caller ID highlighted to go to the Caller ID Quick Menu.

If you have calls in the Call Log, these will be listed in the Caller ID Quick Menu. To get more information on the calls listed, proceed to the next steps.

4.Use the up and down arrows to highlight Edit Settings. Press SELECT to select it.

5.Press the red button on your remote to move to the Call Log tab in the Caller ID screen.

Deleting Calls

From the Caller ID Log screen, you can delete entries:

1.Highlight the call you wish to delete and press SELECT.

2.Press SELECT with Delete highlighted. The next screen asks you to confirm that you want to delete the call. Press SELECT to delete the record from the Caller ID Log.

Tip: Don’t Forget About the EXIT

Button

Press the EXIT button on the remote control to remove the on-screen menus and return to normal viewing.

Chapter 4 33