3.Using the number keys, enter
4.Press and release the SELECT key. (The green light flashes twice.)
NOTE: DIRECTV® Receivers don’t have volume control, so the remote will not allow the user to lock vol- ume to the DIRECTV mode.
ACTIVATING AND DEACTIVATING THE RF TRANSMITTER
Your DIRECTV Remote Control features RF (radio frequency) capability. When you activate the RF feature of your remote control, you can control your DIRECTV Receiver from anywhere in your home. You do not need to be within the line of sight of your receiver to control it.
NOTE: Not all DIRECTV Receivers are
Activating the RF Transmitter
To activate the RF transmitter on your DIRECTV Remote Control, perform the following steps:
1.Locate the 12 digit Receiver ID (RID) number of your DIRECTV Receiver. You can find the RID number on the back panel of your receiver, or inside the CAM access door next to the reset button.
2.Write down the last six digits of the RID number.
3.Slide the mode switch to DIRECTV, AV1, or AV2.
4.Press and hold the MUTE and SELECT keys until the green light under the selected switch flashes twice and release both keys.
5.Using the number keys, enter 9 6 1. (The green light flashes twice.)
6.Press and release CHANS. (The green light flashes twice.)
7.Using the NUMBER keys, enter the last six digits of the RID number. (See step 2 above.)
8.Press and release the SELECT key. (The green light flashes twice.)
Deactivating the RF Transmitter
To deactivate the RF transmitter on your DIRECTV Remote Control, perform the following steps:
1.Slide the mode switch to DIRECTV, AV1, or AV2.
2.Press and hold the MUTE and SELECT keys until the green light under the selected switch flashes twice and release both keys.
3.Using the number keys, enter 9 6 1. (The green light flashes twice.)
12