22
2 Unpacking and connecting
Unpacking

2 Unpacking and connecting

2.1 Unpacking Unpack the appliance and all accessory parts and check
that the contents are complete. Information regarding the
scope of delivery, ZPage 18, "An overview of your
Magnum MPR".

2.2 Assembly

1. Push the end of the suction hose (Fig. 2/1) into the
connection point (Fig. 2/2) of the cylinder vacuum
cleaner until the lock audibly clicks into place.
2. Push the handle (Fig. 3/1) into the upper end of the
telescopic tube (Fig. 3/2).
3. Push the floor nozzle (Fig. 3/3) onto the lower end of the
telescopic tube (Fig. 3/4).
4. Adjust the length of the telescopic tube. To do this,
press the telescopic tube lock (Fig. 4/1) forwards
(Fig. 4/a). Then pull the telescopic tube by the handle
(Fig. 1/1) to the desired length (Fig.4/b). To lock it,
release the telescopic tube lock when you let go. You
will hear an audible click.
Your cylinder vacuum cleaner is now ready to use.
ATTENTION:
Always transport/send the appliance in its original
packaging so that it does not become damaged. Keep
the packing material for this purpose.
Dispose of any packing material that is no longer
required in accordance with the provisions applicable in
your country.
NOTE:
If you should notice damage due to transport, then
contact your dealer immediately.
WARNING:
Only assemble the appliance if the plug has been pulled
out of the socket. It could be switched on by accident.
NOTE:
It may be necessary to push a bit harder.
Fig.2
1
2
Fig.3
1
3
4
2
Fig.4
1