SAFETY RULES

SAFE OPERATION PRACTICES FOR RIDE-ON MOWERS

DO NOT:

Do not turn on slopes unless necessary, and then, turn slowly and gradually downhill, if possible.

Do not mow near drop-off, ditches, or embankments. The mower could suddenly turn over if a wheel is over the edge of a cliff or ditch, or if an edge caves in.

Do not mow on wet grass. Reduced trac- tion could cause sliding.

Do not try to stabilize the machine by putting your foot on the ground.

Do not use grass catcher on steep slopes.

III. CHILDREN

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them.

NEVER allow children to operate the machine.

Keep children out of the mowing area and under the watchful care of another respon- sible adult.

Be alert and turn off the machine if children enter the area.

Before and when backing, look behind and down for small children.

Never carry children. They may fall off and be seriously injured or interfere with safe machine operation.

Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

IV. SERVICE

The operation of any mower can result in foreign objects thrown into the eyes, which

`can result in severe eye damage. Always wear safety glasses or eye shields while operating your mower or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or

standard safety glasses.

Use extra care in handling gasoline and other fuels. They are flammable and vapors are explosive.

-Use only an approved container.

-Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling. Do not smoke.

-Never refuel the machine indoors.

-Never store the machine or fuel container inside where there is an open flame, such as a water heater.

Never run a machine inside a closed area.

Keep nuts and bolts, especially blade attachment bolts, tight and keep equipment in good condition.

Never tamper with safety devices. Check their proper operation regularly.

Keep machine free of grass, leaves, or other debris buildup. Clean oil or fuel spillage. Allow machine to cool before storing.

Stop and inspect the equipment if you strike an object. Repair, if necessary, before restarting.

Never make adjustments or repairs with the engine running.

Grass catcher components are subject to wear, damage, and deterioration, which could expose moving parts or allow objects to be thrown. Frequently check components and replace with manufacturer’s recom- mended parts, when necessary.

Mower blades are sharp and can cut. Wrap the blade(s) or wear gloves, and use extra caution when servicing them.

Check brake operation frequently. Adjust and service as shown in the Operator’s manual.

3

Page 3
Image 3
Dixon 114892-DCR2, 114893 - DCK2 manual III. Children, Safe Operation Practices for RIDE-ON Mowers Do not

114892-DCR2, 114893 - DCK2 specifications

The Dixon 114893 - DCK2 and 114892 - DCR2 are innovative products designed to enhance user experience and productivity in various industrial applications. These models are part of a comprehensive line of tools and equipment aimed at professionals seeking reliable and high-performance solutions.

The Dixon 114893 - DCK2 is a dual-function tool offering both power and versatility. One of its main features includes a high-capacity battery that ensures long operational hours without frequent recharging. This is particularly beneficial for users who require consistent performance over extended periods, such as in construction or maintenance tasks. The DCK2 boasts an ergonomic design, making it comfortable to handle during prolonged use.

Equipped with advanced technology, the DCK2 features a brushless motor. This technology not only increases efficiency but also extends the lifespan of the tool. Users can expect improved torque and speed control, contributing to precise handling and varied applications. Additionally, the DCK2 offers multiple speed settings, allowing for customization based on the specific requirements of a task.

On the other hand, the Dixon 114892 - DCR2 is designed as a robust charger compatible with multiple battery types. Its main feature is fast charging capability, allowing users to minimize downtime while maximizing productivity. The DCR2 is equipped with smart charging technology that automatically adjusts the charging rate based on the battery's condition, ensuring optimal performance and longevity.

Safety is a priority with the DCR2, which includes features such as short-circuit protection and over-temperature cut-off. This ensures that both the charger and batteries remain safe during use. Furthermore, the DCR2's compact design makes it easy to transport and store, catering to mobile professionals who require convenient solutions on the go.

Together, the Dixon 114893 - DCK2 and 114892 - DCR2 provide a synergistic solution for users seeking durable and efficient tools. Their blend of modern technologies, robust construction, and user-friendly functionalities positions them as essential assets in any industrial toolkit. Whether you are a contractor, mechanic, or DIY enthusiast, these products are engineered to meet diverse needs while ensuring reliable operation in various working conditions.