Dixon 13633-0702 manual Specifications, Model ZTR 4515, 4516

		SPECIFICATIONS
	Model ZTR 4515, 4516 & 4518
CHASSIS:	Twin 12 gauge side frames, 7 gauge transmission & engine base
	plate.
BODY:	All body parts made of high density polyethylene. Dent and corrosion
	resistant.
MOWER DECK:	42” Deck: 13 GA Stamped Steel Construction-42” Cut Width
	50” Deck: 11 GA Fabricated Construction/Reinforcement Ribs-50”
	Cut Width
	Cut height approximately 1-1/2” to 4” via 7 position lift handle.
BLADE DRIVE:	Electric clutch.
TRANSMISSION:	Each rear wheel is independently driven by a HydroGear IZT
	hydrostatic drive.
ENGINES:
Model 4515:	15.5 HP Briggs & Stratton Vanguard, 4-Cycle, Single Cylinder,
	Overhead Valve, Air-Cooled, Gasoline, Vertical Shaft with Cast Iron
	Cylinder Sleeve, Full pressure lube with spin-on filter
Model 4516:	16 HP Kohler Command 460 cc, Single Cylinder, Overhead Valve,
	Air Cooled, Gasoline, Pressure Lubricated with oil filter, Vertical
	Shaft, Aluminum Head and Block with Cast-Iron Cylinder Liner.
Model 4518:	18 HP Kohler Command Twin Cylinder, Overhead Valve, Air Cooled,
	Gasoline, Pressure Lubricated with oil filter, Vertical Shaft,
	Aluminum Head and Block with Cast-Iron Cylinder Liner.
STARTING	Electric by key switch operation with safety interlock blade drive.
SYSTEM :
TIRES:	Front	11 x 4.00 x 5 ribbed tread
	Rear	18 x 8.50 x 8 Turf Trac R/S
RECOMMENDED	Front	16-21 PSI
TIRE PRESSURE:	Rear	8-14 PSI
CAPACITIES:	Fuel	2.7 gallons total
	Engine	B&S - 1.5 quarts	Kohler - 2 quarts
DIMENSIONS:	Width	44” maximum track width
	Height	42” to top edge of seat
	Length	72” hitch tab to front bumper
	Weight	Power Unit:	463 lbs.
		w/42” Deck:	547 lbs.
		w/50” Deck:	603 lbs.

Additional information provided in service instructions under the individual component.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

13