CARE AND MAINTENANCE
BELTS:
Check belts every 50 hours. Replace any belts found to be in poor condition.
BELT TENSION:
42” Deck: | Mower Deck Serpentine Belt | P/N 6109 |
| Manual adjustment. Refer to illustration below. | |
| Engine to Mower Deck Belt: | P/N 5861 |
| Auto tensioner with spring loaded idler. No | |
| adjustment required. |
|
50” Deck: | Mower Deck Serpentine Belt: | P/N 1300 |
| Manual adjustment. Refer to illustration below. | |
| Engine to Mower Deck Belt: | P/N 7174 |
| Auto tensioner with spring loaded idler. No | |
| adjustment required. |
|
Idler Weldment
Idler Shock Mount
“L” Rod | Hex Nut |
3/4”
(42”/50” Serpentine)
Tighten or Loosen Hex Nut to achieve this dimension
33
