Dixon 16134-0803 manual Care And Maintenance, Mower Deck Leveling Procedure

CARE AND MAINTENANCE

MOWER DECK LEVELING PROCEDURE:

1.Place mower on a smooth, level surface and check tire pressures to insure correct stance. Tires should be inflated as follows.

Front: 16 - 21 lbs

Rear: 8 - 14 lbs

2.Turn each outer blade tip to align with the deck in a side to side manner.

3.Measure from the floor surface up to thebottom of the blade tip on the discharge side of the mower. Retain this measurement. Move to the opposite side and check to see if that measurement is the same. If adjustment is required, turn nut on one or both of the rear L-rods until both measurements are equal.

4.Turn each outer blade tip to align with the deck in a front to rear manner.

5.Measure from the floor surface up to the bot- tom of the blade tips at both the front and rear of the blades. Rear of blade tips should be to 1/8" to 1/4" higher than the front of blade tips. If adjustment is necessary, turn nut on front L- rod.

36