OPERATION INSTRUCTIONS
24
PARKING BRAKE SWITCH TEST :
a) Swing control levers to outward position.
b) Disengage blade drive.
c) Put parking brake in OFF position.
d) Turn ignition switch to START .
Engine should not turn over or attempt to start.
CONTROL LEVER SWITCH TEST:
a) Disengage blade drive.
b) Put parking brake in ON position.
c) Swing control levers inward.
d) Turn ignition switch to START .
Engine should not turn over or attempt to start.
NOTE: If any safety check fails, do not operate the
mower until the system has been checked and repaired
by an Authorized Dixon® Dealer.
TESTING OF SAFETY INTERLOCK SYSTEMS:
Failure to observe the following testing instructions
could result in serious injury or death.
The following tests should be performed at the start
of each mowing day.