CARE AND MAINTENANCE

MOWER DECK LEVELING PROCEDURE:

1.Place mower on a smooth, level surface and check tire pressures to insure correct stance. Tires should be inflated as follows.

Front: 16 - 21 lbs

Rear: 8 - 14 lbs

2.Turn blade so tips align with the deck in a side to side manner.

3.Measure from the floor surface up to the bottom of the blade tip on the discharge side of the mower. Retain this measurement. Move to the opposite side and check to see if that measurement is the same. If adjustment is required, turn nut on one or both of the rear L-rods until both measurements are equal.

4.Turn blade so tips align with the deck in a front to rear manner.

5.Measure from the floor surface up to the bottom of the blade tip at both the front and rear of the blade. Rear blade tip should be 1/8" to 1/4" higher than the front blade tip. If adjustment is necessary, turn nut on front L-rod.

(See Illustration B, page 40)

NOTE: This will place the mower deck in a base measurement position. Additional adjustment may be required to achieve desired cut for the type of grass or conditions involved.

41

Page 40 Page 42
Page 41
Image 41
Dixon 16463-0704 manual Mower Deck Leveling Procedure
Page 40 Page 42

16463-0704 specifications

Dixon 16463-0704 is a high-performance product widely recognized in the fluid transfer and management industry. This specific model is engineered with precision, catering primarily to applications that require efficient and reliable fluid flow control.

One of the main features of the Dixon 16463-0704 is its robust construction. Made from durable materials, it ensures excellent resistance against corrosion and abrasion, making it suitable for a variety of environments. The design allows for easy installation and maintenance, which is essential for operations that prioritize minimal downtime.

The Dixon 16463-0704 comes equipped with advanced sealing technology that guarantees a leak-proof performance. This is critical for industries dealing with hazardous or high-pressured fluids where even the slightest leakage could lead to significant safety hazards or financial losses. The innovative sealing mechanism not only enhances safety but also increases the longevity of the product.

In terms of compatibility, the Dixon 16463-0704 is designed to function seamlessly with a wide range of fittings and hoses. This versatility makes it a great solution for diverse applications, including agricultural, industrial, and construction uses. The product's ability to connect with various systems provides users with flexibility in their operations.

Another important characteristic of the Dixon 16463-0704 is its pressure rating. Tailored for high-pressure applications, it can sustain pressures that are common in demanding environments. This aspect is vital for users who require assurance that their equipment can withstand operational stresses without compromising integrity.

The Dixon 16463-0704 also features a lightweight design that does not sacrifice strength. This characteristic is beneficial for ease of handling, transport, and installation, which can lead to increased efficiency in workflows.

Overall, the Dixon 16463-0704 stands out as a premium choice in the market for fluid handling components, showcasing a blend of durability, safety, and versatility. Its advanced technologies and features make it an essential tool for professionals who depend on reliable fluid transfer solutions. Whether in agriculture, oil and gas, or manufacturing, the Dixon 16463-0704 proves to be a trustworthy ally in achieving operational excellence.
Top Page Image Contents