OPERATION INSTRUCTIONS

MOWING WITH A MULCHING ATTACHMENT:

Mulching or recycling the grass clippings requires a totally different mowing approach than would be normal when side discharging or bagging the grass. There may be instances or conditions where it is not possible to hide all the recycled or mulched clippings.

In order to achieve the best results, please read and follow the mulching tips listed below:

1.Read and follow the installation instructions that are included with your mulcher.

2.Set the engine speed control to the wide open or full setting.

3.Place the mower deck cut height selector in either the top or second notch. Never cut more than 3/4” to 1” off the grass at any one time. Attempting to cut more grass will result in the deck plugging and cause the engine to stall.

4.It may be necessary to cut the lawn twice to achieve acceptable mulching performance especially on first cuttings or if the lawn is heavily fertilized.

5.Do not attempt to cut grass when it is wet. Mulching performance will be very poor in wet grass conditions.

6.Maintain sharp blades throughout the cutting season. This is very important. Optimal mulching performance cannot be obtained with a dull or nicked up blade.

26

Page 25 Page 27
Page 26
Image 26
Dixon 16463-106 manual Mowing with a Mulching Attachment
Page 25 Page 27

16463-106 specifications

The Dixon 16463-106 is a robust and versatile product that stands out in its category due to its innovative design and range of high-performance features. As a prominent wellhead assembly component, it is widely utilized in various industrial applications, particularly in the oil and gas sector.

One of the key features of the Dixon 16463-106 is its durable construction. It is typically made from high-quality materials such as stainless steel or carbon steel, ensuring longevity and resistance to harsh environmental conditions. This resilience not only enhances its performance but also allows it to maintain structural integrity under high pressure and temperature fluctuations.

Another significant aspect of the Dixon 16463-106 is its precision engineering. The component is designed to meet rigorous industry standards, ensuring reliability and safety during operation. This is critical in applications where the margin for error is minimal, as any failure could have catastrophic consequences.

The Dixon 16463-106 employs advanced sealing technologies that are designed to prevent leaks and ensure optimal fluid control. These sealing mechanisms are crucial for maintaining system integrity and minimizing maintenance costs over time. Furthermore, the component features an easy-to-install design, simplifying the installation process and reducing labor costs for operators.

In terms of compatibility, the Dixon 16463-106 is designed to work seamlessly with a range of other equipment and fittings, making it a versatile choice for various setups. This adaptability is essential for industries that require flexible solutions to meet changing operational demands.

Moreover, the Dixon 16463-106 is engineered for ease of maintenance. It is designed with accessibility in mind, allowing technicians to perform inspections and servicing without extensive downtime. This feature is particularly valuable for industries where continuous operation is critical.

Finally, environmental considerations have not been overlooked in the design of the Dixon 16463-106. The manufacturers prioritize sustainability and aim to provide products that contribute to more efficient resource management and reduced environmental impact.

In summary, the Dixon 16463-106 is characterized by its durability, precision engineering, advanced sealing technologies, compatibility with various systems, ease of maintenance, and commitment to environmental sustainability. These features make it a leading choice for industries requiring reliable and efficient solutions.
Top Page Image Contents