WARNING

Failure to observe the following safety instructions could result in serious injury or death.

FIRE HAZARDS (continued):

To prevent fire or explosion, keep sparks and open flames away from battery.

Keep electrical connections clean and tight. Inspect them often. Loose connections and corrosion increase fire risk.

Before disconnecting the negative ground cable, make sure all switches are off. This decreases the chance of sparking and fire.

Use care when backing to avoid pushing the grass bags into the frame or “hot” exhaust muffler of the engine. Fire could result.

To prevent fire and explosion caused by static electricity:

Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place containers on the ground away from your vehicle before filling.

When practical, remove fuel powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, refuel such equipment on a trailer with a portable container, rather than from a fuel dispenser nozzle.

If a fuel dispenser nozzle must be used, keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock-open device.

13

Page 12 Page 14
Page 13
Image 13
Dixon 16463-106 manual Fire Hazards
Page 12 Page 14

16463-106 specifications

The Dixon 16463-106 is a robust and versatile product that stands out in its category due to its innovative design and range of high-performance features. As a prominent wellhead assembly component, it is widely utilized in various industrial applications, particularly in the oil and gas sector.

One of the key features of the Dixon 16463-106 is its durable construction. It is typically made from high-quality materials such as stainless steel or carbon steel, ensuring longevity and resistance to harsh environmental conditions. This resilience not only enhances its performance but also allows it to maintain structural integrity under high pressure and temperature fluctuations.

Another significant aspect of the Dixon 16463-106 is its precision engineering. The component is designed to meet rigorous industry standards, ensuring reliability and safety during operation. This is critical in applications where the margin for error is minimal, as any failure could have catastrophic consequences.

The Dixon 16463-106 employs advanced sealing technologies that are designed to prevent leaks and ensure optimal fluid control. These sealing mechanisms are crucial for maintaining system integrity and minimizing maintenance costs over time. Furthermore, the component features an easy-to-install design, simplifying the installation process and reducing labor costs for operators.

In terms of compatibility, the Dixon 16463-106 is designed to work seamlessly with a range of other equipment and fittings, making it a versatile choice for various setups. This adaptability is essential for industries that require flexible solutions to meet changing operational demands.

Moreover, the Dixon 16463-106 is engineered for ease of maintenance. It is designed with accessibility in mind, allowing technicians to perform inspections and servicing without extensive downtime. This feature is particularly valuable for industries where continuous operation is critical.

Finally, environmental considerations have not been overlooked in the design of the Dixon 16463-106. The manufacturers prioritize sustainability and aim to provide products that contribute to more efficient resource management and reduced environmental impact.

In summary, the Dixon 16463-106 is characterized by its durability, precision engineering, advanced sealing technologies, compatibility with various systems, ease of maintenance, and commitment to environmental sustainability. These features make it a leading choice for industries requiring reliable and efficient solutions.
Top Page Image Contents