AMX NXD-CV5 manual CV5 Panel/enclosure Button latch Trim Ring Latches, Colored Button Trim Ring

Installation

3.Assemble the Kit components:

To assemble the Bezel Kit with Buttons (FIG. 15):

CV5 Panel/enclosure

Button latch

Trim

Ring

Latches

Button installation

(showing the internal surface of Faceplate)

Colored Button Trim Ring

Colored Faceplate (outside surface shown)

FIG. 15 Installing the Button Bezel Kit (NXA-BEZ-5B)

From along the internal surface of the colored Faceplate, install the six colored buttons by firmly inserting them into the button openings until the Button latch secures the button in place (FIG. 15).

Grasp the provided Button Trim Ring on both sides and fit it into the groove along the outside surface of the Faceplate.

Gently insert the Button Trim Ring latches into their corresponding openings on the outer surface of the internal Faceplate (FIG. 15).

Firmly press down around the Button Trim Ring until all of the latches are securely inserted into their openings on the Faceplate, and the Button Trim Ring is securely fastened. Verify the Button Trim Ring is firmly inserted onto the Faceplate and that there are no gaps between this Trim Ring and the outer surface of the Faceplate.

Continue on to Step 4 to complete the installation process.

To assemble the Bezel Kit with No-Buttons (FIG. 16):

Grasp the provided No-Button Trim Ring on both sides and fit it into the groove along the outside surface of the Faceplate.

Firmly press down around the No-Button Trim Ring until all of the latches are securely inserted into their openings on the Faceplate, and the Trim Ring is securely fastened. Verify the No-Button Trim Ring is firmly inserted onto the Faceplate and that there are no gaps between this Trim Ring and the outer surface of the Faceplate.

Continue on to Step 4 to complete the installation process.

4.Place that new Faceplate onto the main NXD-CV5 unit. Make sure to align the Microphone, Light, and PIR Motion sensor locations on the main unit to their respective openings on the Faceplate assembly.

18 5" Modero Widescreen Touch Panel