AMX NXD-CV5 Button Commands Cont, Programming, BCT-vt addr range,button states range,color value

		Programming
"^" Button Commands (Cont.)
^BCT	Only if the specified text color is not the same as the current color.
Set the text color	Note: Color can be assigned by color name (without spaces), number or R,G,B value
to the specified	(RRGGBB or RRGGBBAA).
color.	Syntax:
	"'^BCT-<vt addr range>,<button states range>,<color value>'"
	Variable:
	variable text address range = 1 - 4000.
	button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
	1 = Off state and 2 = On state).
	color value = Refer to theRGB Values for all 88 Basic Colors table on page 99 for more
	information.
	Example:
	SEND_COMMAND Panel,"'^BCT-500.504&510,1,12'"
	Sets the Off state border color to 12 (Yellow). Colors can be set by Color Numbers, Color
	name, R,G,B,alpha colors (RRGGBBAA) and R, G & B colors values (RRGGBB).
^BDO	Determines what order each layer of the button is drawn.
Set the button	Syntax:
draw order.	"'^BDO-<vt addr range>,<button states range>,<1-5><1-5><1-5><1-
	5><1-5>'"
	Variable:
	variable text address range = 1 - 4000.
	button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
	1 = Off state and 2 = On state).
	layer assignments = Fill Layer	= 1
	Image Layer = 2
	Icon Layer	= 3
	Text Layer	= 4
	Border Layer = 5
	Note: The layer assignments are from bottom to top. The default draw order is 12345.
	Example:
	SEND_COMMAND Panel,"'^BDO-530,1&2,51432'"
	Sets the button’s variable text 530 ON/OFF state draw order (from bottom to top) to
	Border, Fill, Text, Icon, and Image.
	Example 2:
	SEND_COMMAND Panel,"'^BDO-1,0,12345'"
	Sets all states of a button back to its default drawing order.
^BFB	ONLY works on General-type buttons.
Set the feedback	Syntax:
type of the button.	"'^BFB-<vt addr range>,<feedback type>'"
	Variable:
	variable text address range = 1 - 4000.
	feedback type = (None, Channel, Invert, On (Always on), Momentary, and Blink).
	Example:

SEND_COMMAND Panel,"'^BFB-500,Momentary'"

Sets the Feedback type of the button to 'Momentary'.

5" Modero Widescreen Touch Panel 107