AMX NXD-CV5 manual Upgrading Modero Firmware, Firmware Pages and Descriptions

Table of Contents
Step 4: Use the USB to Configure a Virtual Master (using NetLinx Studio)	38
Step 5: Confirm and View the current AMX USB device connections	40
Configuring a Wired Ethernet Connection	40
Step 1: Configure the Panel’s Wired IP Settings	41
IP Settings section - Configuring a DHCP Address over Ethernet	41
IP Settings section - Configuring a Static IP Address over Ethernet	41
Step 2: Choose a Master Connection Mode Setting	42
Step 3: Configure an Ethernet Connection Type	42
Master Connection section - Virtual Master communication over Ethernet	43
Master Connection section - NetLinx Master Ethernet IP Address - URL Mode	45
Master Connection section - NetLinx Master Ethernet IP Address - Listen Mode	46
Master Connection section - NetLinx Master Ethernet IP Address - Auto Mode	47
Using G4 Web Control to Interact with a G4 Panel	47
Using your NetLinx Master to control the G4 panel	49
Upgrading Modero Firmware	53
Upgrading the Modero Firmware via the USB port	53
Step 1: Configure the panel for a USB Connection Type	53
Step 2: Prepare NetLinx Studio for communication via the USB port	54
Step 3: Confirm and Upgrade the firmware via the USB port	55
Upgrading the Modero Firmware via Ethernet (IP Address)	57
Step 1: Prepare the Master for communication via an IP	57
Step 2: Prepare the panel for communication via an IP	58
Step 3: Verify and Upgrade the panel firmware via an IP	59
Firmware Pages and Descriptions	61
Setup Navigation Buttons	61
Protected Setup	61
Setup Page	62
Information	63
Project Information Page	64
Panel Information Page	65
Time & Date Setup Page	66
Audio Settings Page	68
Supported sampling rates for WAV	69
Video Adjustment Page	69
Protected Setup Navigation Buttons	71
Protected Setup Page	72
System Settings Page	74
Calibration Page	76
G4 Web Control Page	77

ii 5" Modero Widescreen Touch Panel