AMX NXD-CV5 Sensor Setup, G4 Web Control Page Elements Cont, Firmware Pages and Descriptions

Firmware Pages and Descriptions

G4 Web Control Page Elements (Cont.)
G4 Web Control Settings
(Cont.):
Web Control Port	Allows you to enter the port value that the VNC Web Server runs on.
	• Default value is 5900.
Maximum Number of
	This read-only field displays the maximum number of users that can be
Connections	simultaneously connected to the target panel via the web.
	• Default value is 1.
Current Connection Count
	This read-only field displays the current number of users connected to the
	target panel via the web. This value cannot exceed the Maximum number field.
G4 Web Control Timeout:	Sets the length of time (in minutes) the panel can remain idle (no cursor
	movements) before the session is closed and the user is disconnected.
	• Minimum value = 0 minutes (panel never times-out)
	• Maximum value = 240 minutes (panel times-out after 240 minutes/4hours)

FIG. 69 Sample relationship between G4 Web Control and Mange WebControl Connections window

Refer to the Using G4 Web Control to Interact with a G4 Panel section on page 47 for more detailed instructions on how to use the G4 Web Control page with the new web-based NetLinx Security application.

Sensor Setup

The Sensor Setup page (FIG. 70) allows you to adjust the Light and Motion Sensor parameters on a Modero touch panel.

FIG. 70 Sensor Setup page

78 5" Modero Widescreen Touch Panel