AMX NXD-CV5 Specifications for 5 Widescreen Video Touch Panel Cont, Introduction, Environment

Introduction

Specifications for 5" Widescreen Video Touch Panel (Cont.)

Side Panel Components
(Cont.):
Mini-USB connector:	• 5-pin Mini-USB connector used for programming, firmware update, and touch
	panel file transfer between the PC and the target panel.
	Note: When connecting the panel to PC using a CC-USB (or compatible)
	cable, be sure to power the panel On before attempting to connect the USB
	cable from the PC to the mini-USB port on the panel. Refer to the Configuring
	and Using USB with a Virtual Master section on page 35 for more
	information.
USB connector:
	• Type-A USB port can connect an external keyboard or mouse device for use
	with Virtual PC applications.
	Note: External USB input devices (keyboard or mouse) must be plugged into
	the rear/side USB connector before the unit is powered-up. The panel will not
	detect these USB input devices until the unit cycles power.
Audio/Video connector:
	• RJ-45 connector for communication of differential audio/video signals
	to/from the touch panel (panel type dependant). This connector receives
	Composite video, Stereo (left/right) audio, and microphone audio.
	• Video is received via the NXA-AVB/ETHERNET Breakout Box. Configuring
	video windows for playback is done using TPDesign4.
	• In-bound audio (from the breakout box) gets directed to the speakers.
	• Out-bound audio is sent from the on-board microphone (on the
	front-panel). Selecting audio files for playback is configured through
	TPDesign4.
Button Assignments:	Button assignments can only be adjusted in TPD4 and not on the panels.
	• Button channel range: 1 - 4000 button push and feedback (per address port)
	• Button variable text range: 1 - 4000 (per address port)
	• Button states range: 1 - 256 (General Button; 1 = Off State, 2 = On State)
	• Level range: 1 - 600 (default level value 0-255, can be set up to 1-65535)
	• Address port range: 1 - 100
Operating / Storage	• Operating Temperature: 0° C (32° F) to 40° C (104° F)
Environment:	• Operating Humidity: 20% - 85% RH
	• Storage Temperature: -20° C (-4° F) to 60° C (140° F)
	• Storage Humidity: 5% - 85% RH
Included Accessories:	• Installation Kit for NXD-CV5 panels (KA2261-01):
	- 2-pin 3.5 mm mini-Phoenix connector
	- Three Drywall clips (62-5924-05) and #6 - sheet metal screws
	- Three Phillips-head screws (#4-40 x 0.250 Black)
	• Mounting Template - Flush Mount Drywall Installation
	• Trim Ring with button openings (60-2261-04) (factory installed)
	• Trim Ring without button openings (60-2261-05)
Other AMX Equipment:	• CB-TP5 Rough-In/Wallbox (FG038-10)
	• NXA-AVB/ETHERNET Breakout Box (FG2254-10)
	- Provides video/audio distribution to the A/V panel over CAT5 cable
	(up to 200’/60.96 m) and accepts either Composite or S-Video
	• NXA-BEZ-5B, Bezel Kit with buttons for Modero 5” Widescreen Wall/Flush
	Mount Touch Panel (NXD-CV5)
	- NXA-BEZ-5B-BG, Beige Faceplate with beige buttons (FG2261-32)
	- NXA-BEZ-5B-BL, Black Faceplate with black buttons (FG2261-30)
	- NXA-BEZ-5B-LA, Light Almond Faceplate with light almond buttons
	(FG2261-33)
	- NXA-BEZ-5B-WH, White Faceplate with white buttons (FG2261-31)

4 5" Modero Widescreen Touch Panel