AMX NXD-CV5 manual Gdi, Giv, Glh, Gll

Programming

"^" Button Commands (Cont.)

^GDI	Syntax:
Change the	"'^GDI-<vt addr range>,<bargraph drag increment>'"
bargraph drag	Variable:
increment.
	variable text address range = 1 - 4000.
	bargraph drag increment = The default drag increment is 256.
	Example:
	SEND_COMMAND Panel,"'^GDI-7,128'"
	Sets the bargraph with variable text 7 to a drag increment of 128.
^GIV	Parameters 1,2, and 3 will cause a bargraph or slider to be inverted regardless of
Invert the	orientation. Their effect will be as described for joysticks.
joystick axis to	Syntax:
move the origin to	"'^GIV-<vt addr range>,<joystick axis to invert>'"
another corner.
	Variable:
	variable text address range = 1 - 4000.
	joystick axis to invert = 0 - 3.
				0 = Normal
		0	1
				1 = Invert horizontal axis
				2 = Invert vertical axis
		2	3
				3 = Invert both axis locations
	For a bargraph 1 = Invert , 0 = Non Invert
	Example:
	SEND_COMMAND Panel,"'^GIV-500,3'"
	Inverts the joystick axis origin to the bottom right corner.
^GLH	Syntax:
Change the	"'^GLH-<vt addr range>,<bargraph hi>'"
bargraph upper	Variable:
limit.
	variable text address range = 1 - 4000.
	bargraph limit range = 1 - 65535 (bargraph upper limit range).
	Example:
	SEND_COMMAND Panel,"'^GLH-500,1000'"
	Changes the bargraph upper limit to 1000.
^GLL	Syntax:
Change the	"'^GLL-<vt addr range>,<bargraph low>'"
bargraph lower	Variable:
limit.
	variable text address range = 1 - 4000.
	bargraph limit range = 1 - 65535 (bargraph lower limit range).
	Example:
	SEND_COMMAND Panel,"'^GLL-500,150'"
	Changes the bargraph lower limit to 150.

118 5" Modero Widescreen Touch Panel