AMX NXD-CV5 manual Information, Setup Page Elements Cont, Inactivity Page Flip, Timeout

	Firmware Pages and Descriptions
Setup Page Elements (Cont.)
Inactivity Page Flip	Sets the number of minutes of inactivity before the panel automatically flips to a
Timeout:	pre-selected touch panel page. When the device goes into this inactivity mode,
	the LCD does not power-down.
	• Press the UP/DN buttons to increase/decrease the time the panel can remain
	inactive before it flips to the preset page. Range = 0 - 240 minutes.
	• Use this button to set the timeout value to zero and disable the inactivity page
	flip mode.
	• The touch panel page used for the Inactivity page flip is shown within a small
	Inactivity Page field.
Panel Brightness:	Sets the display brightness level of the panel.
	• Press the UP/DN buttons to adjust the brightness level. Range = 0 - 100.
	• The on-screen bargraph can be dragged to adjust the Brightness level which
	is then reflected as a corresponding numeric value within the Panel
	Brightness field.

Information

The Information button provides a menu to select either the Project Information Page section on page 64 or the Panel Information Page section on page 65. Select either option to access that page.

FIG. 56 Information menu

5" Modero Widescreen Touch Panel 63