AMX NXD-CV5 manual X = Ground L = Live Hot R = Return Cold, Balanced OUT

CV5 Touch Panel Accessories

The 3 wires used in a typical XLR lead are often referred to as Ground, Live (Hot) and Return (Cold). "Live" and "Return" carry the "in-phase" and "out-of-phase" versions of the audio respectively. The pins of the XLR plug/socket are as follows:

•X = Ground

•L = Live (Hot)

•R = Return (Cold)

When connecting the MIC OUT connector to a balanced audio input (FIG. 9), use all three audio terminals (+, -, and GND), then connect the "+" terminal to the "live" signal, the "-" terminal to the "return" signal, and the "GND" terminal to the ground signal.

GND

OUT-

OUT+

Ground signal
Return signal	Balanced OUT
Line signal

FIG. 9 Wiring the rear MIC OUT connector for use with Balanced Audio

Each bundle of 4 twisted pairs includes a colored tape indicator for identification.

5" Modero Widescreen Touch Panel 11