AMX NXD-CV5 manual Programming, Button Assignments, Page Commands

Models: NXD-CV5

1 162
Download 162 pages 52.79 Kb
Page 99
Image 99
Programming

Programming

Programming

You can program the touch panel, using the commands in this section, to perform a wide variety of operations using Send_Commands and variable text commands.

A device must first be defined in the NetLinx programming language with values for the Device:

Port: System (in all programming examples - Panel is used in place of these values and represents all Modero panels).

Verify you are using the latest NetLinx Master and Modero firmware.

Verify you are using the latest version of NetLinx Studio and TPD4.

Button Assignments

Button Channel Range: 1 - 4000 Button push and Feedback (per address port)

Button Variable Text range: 1 - 4000 (per address port)

Button States Range: 1 - 256

(0 = All states, for General buttons 1 = Off state and 2 = On state).

Level Range: 1 - 600 (Default level value 0 - 255, can be set up to 1 - 65535)

Address port Range: 1 - 100

These button assignments can only be adjusted in TPD4 and not on the panels themselves.

Page Commands

These Page Commands are used in NetLinx Programming Language and are case insensitive.

Page Commands

@APG

Add the popup page to a group if it does not already exist. If the new popup is added to a

Add a specific

group which has a popup displayed on the current page along with the new pop-up, the

displayed popup will be hidden and the new popup will be displayed.

popup page to a

 

specified popup

Syntax:

group.

"'@APG-<popup page name>;<popup group name>'"

 

 

Variable:

 

popup page name = 1 - 50 ASCII characters. Name of the popup page.

 

popup group name = 1 - 50 ASCII characters. Name of the popup group.

 

Example:

 

SEND_COMMAND Panel,"'@APG-Popup1;Group1'"

 

Adds the popup page ’Popup1’ to the popup group ’Group1’.

 

 

@CPG

Syntax:

Clear all popup

"'@CPG-<popup group name>'"

pages from

Variable:

specified popup

popup group name = 1 - 50 ASCII characters. Name of the popup group.

group.

 

 

Example:

 

SEND_COMMAND Panel,"'@CPG-Group1'"

 

Clears all popup pages from the popup group ’Group1’.

 

 

5" Modero Widescreen Touch Panel

93

 

 

Page 99
Image 99
AMX NXD-CV5 manual Programming, Button Assignments, Page Commands