Dixon 36 & 48 owner manual Transmission Output Shaft Blade Engagement Bellcrank, Cutterhousings

Lubrication Points

To assure proper lubrication on moving parts, it is recommended that you lubricate the following components with a high-quality EP2 high temperature based grease or equivalent. Should the conditions of operation be more severe than normal, the lubrication interval may be shorter than recommended. GTR/OPE Grease is the recommended lubricant.

Transmission Output Shaft	Blade Engagement Bellcrank
(Left & Ride Sides)	Every 40 hrs./Weekly
Every 40 hrs./Weekly

Blade Engagement Pivot

Idler Arm Pivot

(Left & Right Sides) Every 40 hrs./Weekly

(Left & Right Sides) Every 40 hrs/Weekly

Cutterhousings

Every 100 hrs./Monthly

Wheel Brake Pivot

(Left & Right Sides) Every 40 hrs/Weekly

	Drive Wheel			Front Caster Wheel
		Front Caster Support
(Left & Right Sides)				(Left & Right Sides)
			(Left & Right Sides)
Every 40 hrs/Weekly				Every 40 hrs/Weekly
			Every 40 hrs/Weekly

16 Dixon Industries, Inc. • Airport Industrial Park • Coffeyville, KS • 67337 • 620-251-2000