Dixon manual Troubleshooting, Engine Runs But Mower Won’T Move Forward, Drive System, Cut Quality

TROUBLESHOOTING

6. ENGINE RUNS BUT MOWER WON’T MOVE FORWARD

Drive belt broken or slipping- - - - - - - - - - - - - - - - replace drive belt Transmission oil low- - - - - - - - - - - - - - - - - - - - - - - - - - - - add oil Damaged transmission- - - - - - - - - - - - - - - - - - - - - -consult dealer Transmission by-pass may be engaged- - - - - - - - - - - - -disengaged

7.MOWER LOSES POWER OR TRANSMISSION OVERHEATS

Engine air filter-- - - - - - - - - - - - - - - - - - - - - - - - - - clean or replace Transmission damage- - - - - - - - - - - - - - - - - - - - - - -consult dealer

8. ENGINE STALLS WHEN BLADES ARE ENGAGED

Operator not on seat- - - - - - - - - - - - - - - - - - - - - - - - - -sit on seat Faulty interlock system- - - - - - - - - - - - - - - - - - - - - - consult dealer Faulty blade spindle bearing - - - - - - - - - - - - - - - - - - consult dealer Deck drive belt not properly routed- - - - - - - - - - - - - - - - - - reroute Blades blocked by foreign material - - - - - - - - - - - clean under deck

9. DRIVE SYSTEM

Mower pulls to side- - - - - - -check tire inflation/adjust control linkage Mower creeps in neutral- - - - - - - - - - - - - - - - adjust control linkage Low on power- - - - - - - - - - - - - - - - - - - - - - - - - -check belt tension

10. CUT QUALITY

Cut uneven left to right- - - - - - - - - - - -check tire inflation/level deck Ends of grass blades are ragged- - - - - - - - - - - - - - sharpen blades Poor dispersal of grass- - - - - - - - - - clean deck/check for loose belt Skips in spots- - - - - - - - - - -check for loose belt/slow ground speed

47