ASSEMBLY
6UPPER CHUTE
1.Attached flex tube to blower and secure with the hose clamp.
2.Slide opposite flex hose end into upper chute.
3.Push upper chute through the gasketed opening in the cover assembly.
4.Rotate flex tube and upper chute so that the chute opening is downwards toward the container bags.
Cover Gasket
Rotate Upper Chute to point downwards towards bags
7FRONT WEIGHTS
1.Center the weight box on the front face of foot plate, as illustrated. Use the holes in weight box as a template to mark and drill four 11/32" diameter holes in foot plate.
2.Attach the weight box to foot plate with four
3.Install weight in weight box.
CAUTION
DO NOT operate mower with grass bagger, unless the front weights are installed.
Weight Box
Install Weight
In Box
10
