SPECIFICATIONS
|
| Model ZTR 3304 |
CHASSIS: | Twin 12 gauge side frames and 7 gauge transmission and engine base plate. | |
BODY: | All body parts are made of rotational molded polyethylene. Front body contains | |
| access panel for battery service. Seat tilts forward to allow transmission service. | |
MOWER DECK: | 11 GA stamped steel construction. | |
| Single 30" cut blade. | |
| Cut height approximately 1" to 4" via 7 position lift handle. | |
BLADE DRIVE: | Mechanical; hand lever engagement. | |
TRANSMISSION: | Each rear wheel is independently driven by chain and sprockets through a | |
| friction mechanical drive. | |
ENGINE: | 14.5 HP Briggs & Stratton I/C Quiet, | |
| Gasoline, Vertical Shaft, Cast Iron Cylinder, | |
| Shroud |
|
STARTING SYSTEM: | Electric by key switch operation with safety interlocks on parking brake and | |
| blade drive. | |
TIRES: | Front | 11 X |
| Rear | 16 X 6.50 X 8 Turf Trac R/S tread. |
RECOMMENDED | Front | |
TIRE PRESSURE: | Rear | |
CAPACITIES: | Fuel | 2.0 gallons total. |
| Engine | 1.25 quarts oil. |
DIMENSIONS: | Width | 32.5" outside rear wheel measurement. |
| Height | 32.0" to top edge of seat. |
| Length | 65.5" hitch tab to front bumper. |
| Weight | 440 lbs. |
NOTE: | Additional information provided in service instructions under the individual | |
| component. | |
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
Page 12
