Dixon 7500 Series Specifications, Chassis, Folded sheet metal and rectangular tube, Body, Seat

		SPECIFICATIONS
		7500 Series
CHASSIS:	Folded sheet metal and rectangular tube
BODY:	Folded sheet metal
SEAT:	Designed for operator comfort with padded back and arm rests.
	Seat is adjustable fore and aft.
MOWER DECK:	Two decks are available. Both decks are made of 10 GA
	fabricated welded construction with 7 GA reinforcement plate.
	Three blades combine for either a 52" or 60" cut width. Cut
	height approximately 1.5" to 5" via 7 position lift handle.
BLADE DRIVE:	Electric clutch
DRIVE SYSTEM:	Each rear wheel is independently driven by a HydroGear
	BDP 10A pump and a HydroGear HGM-15E hydraulic motor.
ENGINE:	23HP Kohler Command, 4-Cycle, V-Configuration, Overhead
	Valve, Air-Cooled, Gasoline, Vertical Shaft, Aluminum Head, and
	Crankcase with Cast Iron Liners, Full Pressure Lubrication/Full
	Flow Filter, Pulse-type Fuel Pump, Fixed Jet Carburetor w/
	Smart-Choke, Electronic Ignition, In-Line Fuel Filter, Dual Element
	Air Cleaner.
STARTING	Electric by key switch operation with safety interlocks on parking
SYSTEM:	brake and blade drive clutch.
TIRES:	Front 13-5.00x6
	Rear 23-9.50x12
RECOMMENDED Front		12 lbs.
TIRE PRESSURE: Rear		12 lbs.
CAPACITIES:	Fuel - 11 gallons (approx)
	Hydrostat oil system - 4 qt with in-line 40 micron filter
	Hydrostat oil recommendation, refer to page 31
	Engine - 2 qts. SAE 10W30 (with filter)
DIMENSIONS:	Width	61"(52" Deck), 69-1/2"(60" Deck)
	Height	43"
	Length	81" (52” Deck), 81” (60” Deck)
	Weight	915 lbs.(48" Deck), 916 lbs.(60" Deck)

Additional information provided in service instructions under the individual component.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

13