Dixon 7500 Series manual Leveling The Deck, Care And Maintenance

CARE AND MAINTENANCE

LEVELING THE DECK:

A.Set the tire pressure on all four tires.

B.Move the tractor to a hard, level surface (i.e. concrete or blacktop). Place a 2x4 board under all four corners of the deck shell, just inside the anti-scalping wheels. Lower the deck down onto the boards. The deck must rest on the boards, not on the anti-scalping wheels. Adjust the deck hangers longer or shorter until the deck “just” comes off of the boards. Remove the boards and verify that the deck is hanging on all four deck hangers, re-adjust if necessary. Lock the jam nuts on the deck hangers. (Note: the two rear deck hangers will be easier to adjust if the fender skirts are removed.)

Rear Deck Hanger (one on each side)

Front Deck Hanger

(one each side)

2x4 board, one each corner, just inside of anti-scalping wheel

33