UNPACKING INSTRUCTIONS
•Remove all parts and packing materials from carton.
•Check carton contents against list. Be sure all parts are there.
TOOLS REQUIRED
•½" Wrench (2)
•9/16" Wrench
•9/16" Socket wrench
•Drill and 5/16" bit
CONTAINER CONTENTS
3 | - Soft bag containers | 4 | - Bolts |
1 | - Upper chute | 8 | - Nuts |
1 | - Lower chute | 8 | - Bolts |
1 | - Catcher mount | 4 | - Bolts |
1 | - Cover Assembly |
|
|
PARTS IDENTIFICATION | DUMP BAG | |
COVER ASSEMBLY | ||
INDICATOR | ||
|
UPPER CHUTE
CHUTE LATCH
BAG CONTAINERS
LOWER CHUTE
LOWER CHUTE ATTACHING
STRAPS
NOTE: When right hand (RH) and left hand (LH.) are mentioned in this manual, it means when seated on the mower in the operator’s position.
CAUTION
BEFORE ASSEMBLING GRASS CATCHER TO MOWER:
•Place motion control levers in “NEUTRAL” position.
•Set parking brake.
•Turn ignition key “OFF” and remove key.
•Make sure the blades and all moving parts have completely stopped.
•Disconnect spark plug and place wire where it cannot come in contact with plug.
7