ASSEMBLY
BLOWER ASSEMBLY
1.Position blower over the discharge tabs on the deck and set blower onto the deck.
2.Be sure the blower is sitting flush against the outside of the deck.
3.Secure the mount bracket to the deck with the pin and hairpin cotter supplied with the kit.
DRIVE BELT
1.Make sure the tension release lever is forward or disengaged.
2.Place the belt over the pulley on the deck. Refer to illustration for proper routing.
3.Move the tension release arm to the rear and engage in the latch.
Discharge Tab
Mount Bracket
Pin
Tension Release Arm | Outer Pulley |
Rear Of Deck | Idler Pulleys | Twist in Belt |
Husqvarna - 11
