WARNING

Failure to observe the following safety instructions could result in serious injury or death.

FIRE HAZARDS (continued):

To prevent fire or explosion, keep sparks and open flames away from battery.

Keep electrical connections clean and tight. Inspect them often. Loose connections and corrosion increase fire risk.

Before disconnecting the negative ground cable, make sure all switches are off. This decreases the chance of sparking and fire.

Use care when backing to avoid pushing the grass bags into the frame or “hot” exhaust muffler of the engine. Fire could result.

To prevent fire and explosion caused by static electricity:

Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place containers on the ground away from your vehicle before filling.

When practical, remove fuel powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, refuel such equipment on a trailer with a portable container, rather than from a fuel dispenser nozzle.

If a fuel dispenser nozzle must be used, keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock-open device.

13

Page 12 Page 14
Page 13
Image 13
Dixon ELS 60 manual Fire Hazards
Page 12 Page 14

ELS 60 specifications

The Dixon ELS 60 is an innovative and versatile engine management solution designed for a broad range of applications. Tailored for performance-driven environments, the ELS 60 combines advanced technologies with user-friendly features, making it an attractive option for both professional and amateur motorsport enthusiasts.

At the heart of the ELS 60 is its powerful processing unit, which allows for rapid data acquisition and real-time engine tuning. This advanced processing capability ensures that users can quickly adapt to changing conditions and optimize engine performance to meet specific demands. The ELS 60 supports a variety of fuel types, including gasoline and ethanol blends, providing flexibility for different setups and tuning requirements.

One of the standout features of the ELS 60 is its comprehensive sensor support. The system can interface with a wide range of sensors, including temperature, pressure, and flow sensors. This extensive compatibility allows users to monitor critical parameters and make informed adjustments, maximizing performance and efficiency.

The Dixon ELS 60 is equipped with an intuitive software interface that simplifies the tuning process. The software provides real-time data visualization and logging capabilities, enabling users to analyze engine performance and make adjustments on-the-fly. With easy-to-navigate menus and customizable dashboards, even those with limited experience can harness the full potential of the system.

Safety is a paramount consideration in engine management, and the ELS 60 addresses this with advanced fail-safe features. These include over-temperature protection and fuel cut-off thresholds that prevent engine damage under extreme conditions. This focus on safety ensures that users can push their engines to the limits without compromising reliability.

Another important characteristic of the ELS 60 is its compact and lightweight design. This enhances its suitability for various applications, from motorsport to industrial uses, where space and weight constraints are critical. Additionally, the robust construction of the ELS 60 ensures durability, even in the most demanding environments.

To sum up, the Dixon ELS 60 represents a cutting-edge engine management solution, combining advanced processing capabilities, extensive sensor support, user-friendly software, and superior safety features. Its compact design and adaptability make it an ideal choice for anyone looking to enhance their engine's performance and reliability. As the automotive landscape continues to evolve, tools like the ELS 60 are becoming indispensable in the quest for improved efficiency and power.
Top Page Image Contents