CARE AND MAINTENANCE

MOWER DECK LEVELING PROCEDURE:

There are a total of (4) threaded adjusters which will control the attitude or pitch of the mower deck. The adjusters have locknuts on the bottom which can be turned up or down to raise or lower the front and rear of the mower deck. Deck should be level or pitched slightly higher in rear.

A.Place the mower on a smooth level surface with front casters positioned t owards deck. Check tire pressures toinsurethe mowerhas a correct stance. Inflate tiresas required:

Front

16 - 21 lbs maximum

Rear:

8-14 lbs maximum

NOTE: Toinsureaccuracyoflevelingprocedure,mower deck drive belt must be installed prior to leveling deck.

B.Wear heavy gloves. Turn each outer blade tip to align with the deck or in a side-to-side manner.

C.Measure from the floor surface up to the bottom of the blade tip on the discharge side of the mower deck. Retain this measurement. Move to the opposite side, check that measurement is the same. If adjustment is required, turnthe nut on the bottomof the front threaded adjuster up or down until both side-to-side measurements are equal. Retain measurement.

44

Page 43 Page 45
Page 44
Image 44
Dixon ELS 60 manual Mower Deck Leveling Procedure
Page 43 Page 45

ELS 60 specifications

The Dixon ELS 60 is an innovative and versatile engine management solution designed for a broad range of applications. Tailored for performance-driven environments, the ELS 60 combines advanced technologies with user-friendly features, making it an attractive option for both professional and amateur motorsport enthusiasts.

At the heart of the ELS 60 is its powerful processing unit, which allows for rapid data acquisition and real-time engine tuning. This advanced processing capability ensures that users can quickly adapt to changing conditions and optimize engine performance to meet specific demands. The ELS 60 supports a variety of fuel types, including gasoline and ethanol blends, providing flexibility for different setups and tuning requirements.

One of the standout features of the ELS 60 is its comprehensive sensor support. The system can interface with a wide range of sensors, including temperature, pressure, and flow sensors. This extensive compatibility allows users to monitor critical parameters and make informed adjustments, maximizing performance and efficiency.

The Dixon ELS 60 is equipped with an intuitive software interface that simplifies the tuning process. The software provides real-time data visualization and logging capabilities, enabling users to analyze engine performance and make adjustments on-the-fly. With easy-to-navigate menus and customizable dashboards, even those with limited experience can harness the full potential of the system.

Safety is a paramount consideration in engine management, and the ELS 60 addresses this with advanced fail-safe features. These include over-temperature protection and fuel cut-off thresholds that prevent engine damage under extreme conditions. This focus on safety ensures that users can push their engines to the limits without compromising reliability.

Another important characteristic of the ELS 60 is its compact and lightweight design. This enhances its suitability for various applications, from motorsport to industrial uses, where space and weight constraints are critical. Additionally, the robust construction of the ELS 60 ensures durability, even in the most demanding environments.

To sum up, the Dixon ELS 60 represents a cutting-edge engine management solution, combining advanced processing capabilities, extensive sensor support, user-friendly software, and superior safety features. Its compact design and adaptability make it an ideal choice for anyone looking to enhance their engine's performance and reliability. As the automotive landscape continues to evolve, tools like the ELS 60 are becoming indispensable in the quest for improved efficiency and power.
Top Page Image Contents