OPERATION INSTRUCTIONS
MOWING INSTRUCTIONS:
CAUTION Be sure that deflector is properly installed on the discharge chute.
1.Start engine and set throttle at full speed.
2.Set desired cut height.
3.Release park brake.
CAUTION Check the area to assure there is no one near.
4.Engage mower blades.
5.Move control levers in and operate per the control instructions on Page 18.
STOPPING INSTRUCTIONS:
1.Turn mower blades off.
2.Move control levers to outboard position.
3.Set parking brake.
4.Move throttle control to slow. Allow engine to run a short time to cool down then turn ignition key to “OFF” and remove key.
25
