Dixon Operator's Manual electric lawn mower Grizzly 2005 manual Changing the Engine OIL

Models: Operator's Manual electric lawn mower Grizzly 2005

1 56

Page 38

CAUTION	HOT oil may cause burns. Allow
	engine to cool before draining oil.

1.The “Dapco” oil drain valve is located on either side of the engine crankcase (depending on the type of engine installed on your ZTR®).

2.Place a suitable container under the drain valve hose.

3.To drain, turn hex head valve stem counter-clockwise with a 10mm wrench or socket. Open to full open (approximately 7 turns).

4.After engine is drained, tighten hex stem.

5.Change oil filter.

6.Fill with oil (see steps on next page).

NOTE: Refer to engine manufacturer’s recommenda- tions for frequency of oil changes.

Hex Head Valve

Stem

Image 38