Dixon RAM XS5025BF / 968999725, RAM XS7227 / 968999724 Deck outer spindle, Engine Oil Filter

LUBRICATION

4. Deck outer spindle

Lubricate using a grease gun, one zerk, each side 2-3 strokes. Use only good quality bearing grease.

WARNING!

Engine oil can be very hot if it is drained directly after stopping the engine. Allow the engine to cool to a safe temperature first.

Engine Oil

5.Engine Oil Filter

•Drain the engine oil in accordance with the work description under the heading Engine Oil/Change Engine Oil.

•Remove the oil filter. If necessary, use a filter remover.

•Wipe new, clean engine oil onto the seal for the new filter.

•Mount the filter by hand with +¾ turn.

•Run the engine warm, then check that there are no leaks around the oil filter seal.

•Check the oil level in the engine, fill

if necessary. The oil filter holds 0.1 qt (0.1 liters) of oil.

8011-733

Deck outer spindle (with belt shield removed)

Changing the oil filter 8011-734

IMPORTANT INFORMATION

Used engine oil is a health hazard and must not be disposed of on the ground or in nature; it should always be disposed of at a workshop or appropriate disposal location.

Avoid skin contact; wash with soap and water in case of spills.

English-50