operation

Mowing Tips

•Observe and flag rocks and other fixed objects to avoid collisions.

•Begin with a high cutting height and reduce it until the desired mowing result is attained.

The average lawn should be cut to

2½" (64 mm) during the cool season and over 3" (76 mm) during the hot months. For healthier and better looking lawns, mow often after moderate growth.

For best cutting performance, grass over 6" (15 cm) in height should be mowed twice. Make the first cut relatively high, the second to the desired height.

•The mowing result will be best with a high engine speed (the blades rotate rapidly) and low speed (the rider moves slowly). If the grass is not

too long and dense, the driving speed can be increased without negatively affecting the mowing result.

•The finest lawns are obtained by mowing often. The lawn becomes more even and the grass clippings more evenly distributed over the mown area. The total time taken is not increased as a higher operating speed can be used without poor mowing results.

•Avoid mowing wet lawns. The mowing result is poorer because the wheels sink into the soft lawn, clumps build, and the grass clippings fasten under the cowling.

•Hose the mower deck underside with water after each use. When cleaning, the mower deck shall be raised into the transport position. Make sure the mower is cooled and the engine is off.

•Use compressed air to clean top surface of the deck. Avoid flooding water on top surface, engine and electrical components.

•When the mulching kit is used, it is important that the mowing interval is frequent.

WARNING!

Clear the lawn of stones and other objects that can be thrown out by the blades.

8011-603

Mowing pattern

WARNING!

Never drive the rider on terrain that slopes more than 10 degrees. Mow slopes up and down, never side to side. Avoid sudden directional changes.

30

Page 29 Page 31
Page 30
Image 30
Dixon 966043101, SPDZTR 30 BF, 966064401 manual Mowing Tips
Page 29 Page 31

966064401, 966043101, SPDZTR 30, SPDZTR 30 BF specifications

The Dixon SPDZTR 30,966064401, and SPDZTR 30 BF,966043101 are cutting-edge tools designed for professionals seeking reliability and efficiency in their operations. These models combine advanced engineering with robust design, making them ideal for various industries, including construction, manufacturing, and utilities.

One of the main features of the Dixon SPDZTR series is its durability. Constructed from high-quality materials, these tools can withstand harsh working conditions, thus ensuring longevity and consistent performance. The bodies are designed to resist corrosion, wear, and impact, making them suitable for outdoor and industrial environments.

Another key characteristic of the SPDZTR models is their ergonomic design. The handles are crafted for comfort, allowing for extended use without causing fatigue. This feature is crucial for professionals who rely on their tools for long hours, as it helps reduce strain and enhances productivity.

The SPDZTR 30,966064401, in particular, boasts advanced technology that incorporates precision engineering. This model features a unique locking mechanism that ensures secure connections, preventing leaks or disconnections during operation. This technology is vital for maintaining the efficiency of fluid transfer systems, where reliability is paramount.

On the other hand, the SPDZTR 30 BF,966043101 is designed with versatility in mind. It is compatible with various attachments and accessories, allowing users to customize their tools based on specific tasks. This adaptability makes the SPDZTR 30 BF a favorite among professionals who deal with multiple applications.

Additionally, both models prioritize safety. They feature integrated safety mechanisms that mitigate the risk of accidental disconnections or malfunctions, ensuring safe operation at all times. This commitment to safety aligns with industry standards, making the SPDZTR series a trustworthy choice.

In conclusion, the Dixon SPDZTR 30,966064401, and SPDZTR 30 BF,966043101 are exemplary tools that combine durability, ergonomic design, advanced technology, and safety features. Their robust construction and adaptability make them essential for professionals in various fields, ultimately enhancing productivity and ensuring reliability in demanding environments. Investing in these tools means investing in quality and performance that lasts.
Top Page Image Contents