Dixon SPDZTR 30 BF operation, Manual Transport, Raise the deck into the highest cutting position

operation

Manual Transport

When pushing or pulling the mower, be sure to engage the EZT Hydrogear bypass linkages. The EZT bypass linkages are located on the rear of the frame, below the rear engine guard.

• Raise the deck into the highest cutting position.

• Pull the EZT bypass linkages out and into the slots. Release linkages to hold in the bypass position.

•Release park brake.

•To reengage the EZT’s to drive, reverse the above procedure.

8050-018

Set bypass linkages into slots on both sides

32