Dixon ZTR 2002 manual Changing The Engine Oil, Oil Fill, Care And Maintenance

CARE AND MAINTENANCE

CAUTION	HOT oil may cause burns. Allow
	engine to cool before draining oil.

CHANGING THE ENGINE OIL:

1.The “Dapco” oil drain valve is located on the left side of the engine crankcase.

2.Place a suitable container under the drain valve. The fitting of a short piece of hose will help direct the oil.

3.To drain, turn hex head valve stem counter-- clockwise with 10mm wrench or socket. Open to full open (approximately 7 turns).

4.After engine is drained, tighten hex stem.

NOTE: Refer to engine manufacturer’s recommendations for frequency of oil changes.

Hex Head Valve Stem

OIL FILL:

1.Drain oil.

2.Clean any spilled oil from engine and chassis.

3.Refill engine with type, and quantity of oil recommended by the engine manufacturer in engine literature.

34