CARE AND MAINTENANCE
BELTS:
Check belts every 50 hours. Replace any belts found to be in poor condition.
BELT TENSION:
Transaxle Drive Belt: | P/N 1684 |
No adjustment required. |
|
Engine to Mower Deck Belt: | P/N 6111 |
No adjustment required. Correct belt tension is maintained through a fixed engine location and a spring loaded idler system. A pulsing movement of the belt idler will be observed both during engagement of the electric blade clutch and actual operation of the mower deck.
Note: Engagement of the electric blade clutch switch may produce a sharp high pitched chirp or squeal as the belt tension loading is absorbed by the idler system. This is normal and not a sign of failure.
Mower Deck Serpentine Belt: | P/N 6109 |
Refer to illustration for adjustment procedure. | |
Idler Weldment | Idler Shock Mount |
| |
“L” Rod | Hex Nut |
3
4 
Tighten or Loosen Hex
Nut to
achieve this
dimension
31
