SPECIFICATIONS
Model ZTR 3014
CHASSIS: | Twin 12 gauge side frames and 7 gauge transmission and engine base plate. | ||
BODY: | All body parts are made of rotational molded polyethylene. Front body contains | ||
| access panel for battery service. Seat tilts forward to allow transmission service. | ||
MOWER DECKS: | 36" Deck: | 11 GA Laser Cut Fabricated | - 36" Cut Width |
| 42" Deck: 13 GA Stamped Steel Construction - 42" Cut Width | ||
| Cut height approximately 1" to 4" via 7 position lift handle. | ||
BLADE DRIVE: | Electric clutch. |
| |
TRANSMISSION: | Each rear wheel is independently driven by chain and sprockets through a | ||
| friction mechanical drive. |
| |
ENGINE: | 14.5 HP Briggs & Stratton OHV I/C Quiet, | ||
| Cooled, Gasoline, Vertical Shaft, Cast Iron Cylinder, | ||
| Laminated Shroud. |
| |
STARTING SYSTEM: | Electric by key switch operation with safety interlocks on parking brake and | ||
| blade drive. |
| |
TIRES: | Front | 11 X 4.00 |
|
| Rear | 18 X 8.50 X 8 Multi Trac tread. | |
RECOMMENDED | Front |
| |
TIRE PRESSURE: | Rear |
| |
CAPACITIES: | Fuel | 2.0 gallons total. |
|
| Engine | 1.25 quarts oil. |
|
DIMENSIONS: | Width | 43.0" outside rear wheel measurement. | |
| Height | 36.0" to top edge of seat. |
|
| Length | 65.5" hitch tab to front bumper. | |
| Weight | 36" Deck: 500 lbs. | 42" Deck: 520 lbs. |
NOTE: | Additional information provided in service instructions under the individual | ||
| component. |
| |
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
Page 17
