16
SPECIFICATIONS
ZEETER 42
CHASSIS: 11 gauge welded channel frame
BODY: All body parts made of rotational molded polyethylene.
Front body contains access panel for battery service.
Seat tilts forward to allow transmission service.
MOWER DECK: 13 GA stamped steel construction. Three blades
combine for a 42 cut width. Cut height approximately
1-1/2 - 4 via 7-position lift handle.
BLADE DRIVE: Electric clutch
TRANSMISSION: Each rear wheel is independently driven by chain and
sprockets through a friction mechanical drive.
ENGINE: 13 HP Briggs & Stratton Powerbuilt, 4-cycle, single
cylinder,air-cooled, gasoline, vertical shaft, aluminum
head and block.
STARTING SYSTEM: Electric by key switch operation with safety interlocks
on parking brake and blade drive.
TIRES: Front 9 x 3.50-4 Turf Saver
Rear 16 x 6.50-8 Turf Saver
RECOMMENDED Front 16-21 PSI
TIRE PRESSURE: Rear 8-14 PSI
CAPACITIES: Fuel 3 quart
Engine 1.25 quarts oil
DIMENSIONS: Width 35 outside rear wheel measurement
Width 55 overall width of deck with deflector
Height 31 to top edge of seat
Length 65.5 hitch tab to front
Weight 427 lbs.
Additional information provided in service instructions under the individual component.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE