Healthrider HRT12920 manual Follow your progress with the displays. See on page

Models: HRT12920

1 30
Download 30 pages 14.43 Kb
Page 13
Image 13
4Follow your progress with the displays. See step 5 on page 10.

To stop the program temporarily, press the Stop button. The Time/Segment Time/Pace display will begin to flash. To restart the program, press the Start button or the Speed button. To end the program, press the Stop button, remove the key, and then reinsert the key.

4Follow your progress with the displays. See step 5 on page 10.

5Measure your heart rate if desired. See step 6 on page 11.

6Turn on the fans if desired. See step 7 on page 11.

7from the console.

When the program has ended, make sure that the incline of the treadmill is at the lowest set- ting. Next, remove the key from the console and put it in a safe place.Note: If the displays and various indicators on the console remain lit after the key is removed, the console is in the “demo” mode. Refer to page 20 and turn off the demo mode.

When you are finished using the treadmill, unplug the power cord.When the program is finished, remove the key

HOW TO USE HEART RATE PROGRAMS

5Measure your heart rate if desired. See step 6 on page 11. CAUTION: If you have heart prob- lems, or if you are over 60 years of age and have been inactive, do not use the heart rate programs. If you are taking medication regu- larly, consult your physician to find whether the medication will affect your exercise heart rate.

Follow the steps below to use a heart rate program.

Note: You must wear the optional chest pulse sen- sor (see page 20) to use a heart rate program.

1Put on the optional chest pulse sensor.

Refer to the instructions included with the optional chest pulse sensor.

2Insert the key fully into the console.

See HOW TO TURN ON THE POWER on page 10.

3Select a heart rate program.

When the key is in- serted, the manual mode will be selected. To select a heart rate program, press the Program Select button

repeatedly until one of the heart rate program indi- cators lights.

The two profiles on the left side of the LED matrix show how the target heart rate will change during the programs. During heart rate program 1, your heart rate will reach approximately 85% of your estimated maximum heart rate; during heart rate program 2, your heart rate will reach approxi- mately 80% of your estimated maximum heart rate. Note: Your estimated maximum heart rate is determined by subtracting your age from 220. For example, if you are 30 years old, your estimated maximum heart rate is 190 beats per minute (220 – 30 = 190).

13

Page 13
Image 13
Healthrider HRT12920 Follow your progress with the displays. See on page, Measure your heart rate if desired. See on page