GE Monogram ZGU36K owner manual Care and Cleaning, General information, Control knobs, Gas Cooktop

Models: ZGU36K

1 24
Download 24 pages 4.57 Kb
Page 14
Image 14
Care and Cleaning

Care and Cleaning

Gas Cooktop

General information

Proper care and cleaning are important so your cooktop will give you efficient and satisfactory service. Follow these directions carefully in caring for it.

Some cooktop models are provided with cleaners. Follow the instructions on the containers.

Before cleaning any part of your cooktop, be sure all burners are off and cool.

DISCONNECT ELECTRICAL POWER TO THE COOKTOP at the fuse box or circuit breaker panel, or pull the cooktop power plug, located beneath the cooktop and inside

the cabinets.

How to remove protective shipping film and packaging tape

Carefully grasp a corner of the protective shipping film with your fingers and slowly peel it from the appliance surface. Do not use any sharp items to remove the film. Remove all of the film before using the appliance for the first time.

To assure no damage is done to the finish of the product, the safest way to remove

the adhesive from packaging tape on new appliances is an application of a household liquid dishwashing detergent. Apply with a soft cloth and allow to soak.

NOTE: The adhesive must be removed from all parts before using the cooktop. It cannot be removed if it is baked on.

Control knobs

The control knobs may be removed for easier cleaning.

Replace the knobs in the OFF position

Make sure the knobs are in the OFF positions and

to ensure proper placement.

 

pull them straight off the stems for cleaning. The

 

knobs can be cleaned in a dishwasher or they may

 

also be washed with soap and water. Make sure the

 

insides of the knobs are dry before replacing.

 

Sealed burner assemblies

Turn all controls OFF before removing the burner parts.

The burner grates, caps and burner heads can be lifted off, making them easy to clean.

Grate

General information Burner cap

Burner head

Electrode

Burner base

CAUTION: Do not operate the burner without all burner parts in place.

How to remove protective shipping film and packaging tapeControl knobs Electrode

The electrode of the spark ignitor is behind each burner. When one burner is turned to LITE, all the burners spark. Do not attempt to disassemble or clean around any burner while another burner is on. An electric shock may result, which could cause you to knock over hot cookware.

14

Page 14
Image 14
GE Monogram ZGU36K Care and Cleaning, General information, How to remove protective shipping film and packaging tape