Manuals / Dixon / Lawn and Garden / Lawn Mower

Dixon 1855-0599, ZTR 3303, ZTR 3304, 6520-1099 manual Changing the Engine OIL, OIL Fill

Models: 6520-1099 1855-0599 ZTR 3304 ZTR 3303

1 42

Download 42 pages 5.66 Kb

Page 34

CARE AND MAINTENANCE

CAUTION	HOT oil may cause burns.
	Allow engine to cool before draining oil.

CHANGING THE ENGINE OIL:

1.The "snap lock" oil drain valve is located on the left side of the engine crankcase.

2.Place a suitable container under the drain valve. The fitting of a short piece of hose to the valve will help direct the oil.

3.Push the valve body in and twist to clear the detent notch.

4.Pulling the valve body outward will start the flow of oil.

NOTE: Refer to engine manufacturer's recommendations for frequency of oil changes.

OIL FILL:

1.Push the valve body in and twist into the detent notch.

2.Clean any spilled oil from engine and chassis.

3.Refill engine with type, and quantity of oil recommended by the engine manufacturer in engine literature.

ClosedOpen

PLEASE DISPOSE OF USED OILS AT PROPER COLLECTION CENTERS.

PROTECT YOUR ENVIRONMENT

Page 34

Image 34

Dixon 1855-0599, ZTR 3303, ZTR 3304, 6520-1099 manual Changing the Engine OIL, OIL Fill

Contents

Model ZTR Dixon Limited Warranty Policy -- Model ZTR Chassis DimensionsSpecifications Subject to Change Without Notice Body Spare Parts Series Important Read Carefully Dixon INDUSTRIES, INC Index Safety Safety Symbols General Operation Slope Operation Do not Children Service Dixon Protection Plus TWO Year Limited Warranty Policy Specifications Model ZTR Shroud Mower Decks Seat Adjustment Instructions Models ZTR 3303 ZTR 3304 ZTR Controls To SET Parking Brake Parking BrakeTransmission Drive System Turning To GO ForwardTo GO Backward Braking Circuit Breaker Operation Instructions Before Operating Mower Testing of Safety Interlock Systems Engine should not turn over or attempt to start Starting Instructions Mowing with a Mulching Attachment CUT High MOW Often Mowing with a Grass Catcher Attachment Maintain Sharp Blades Throughout The Cutting Season Side Discharge of the Clippings Grass Height Suggestions Maintenance Schedule Care and MaintenanceBattery Cutter Blade Maintenance Belt Tension Deck REMOVAL-MANUAL CLUTCH-MODELS 3303 Deck Removal Electric Clutch Model ZTR Place cut height lever in lowest cut position Lubrication Service IntervalsFuel Shut OFF Valve Locations Changing the Engine OIL OIL Fill Drive System Adjustments Rear Chain Adjustment PARTS/SERVICE Cleaning the MowerWarranty Wheels and Tires Blades Standard Service Parts ListBriggs & Stratton AIR Filter Part Numbers Belts Mower CUT Quality TroubleshootingSituation Causes Remedy Drive System Electrical System Owner Information Date OIL Changed Date Engine Tuned Series