Dixon 1998, ZTR 4515K manual Specifications

	SPECIFICATIONS
	Models ZTR 4515Band4515K
CHASSIS:	Twin 12 gauge side frames and 7 gauge transmission and engine base plate.
BODY:	All body parts are made of high density polyethylene. Dent and corrosion
	resistant. Front body contains access panel for battery service.
MOWER DECKS:	36" Deck: 1 1 GA Laser Cut Fabricated - 36" Cut Width 42"
	Deck: 13 GA Stamped Steel Construction - 42" Cut Width
	Cut height approximately 1 " to 4" via 7 position lift handle.
BLADE DRIVE:	Electric clutch.
TRANSMISSION:	Each rear wheel is independently driven by a HydroGear IZT hydrostatic drive.
ENGINE:
Model 451 5B:	15 HP Vanguard Briggs & Stratton, 4-Cycle, Single Cylinder, Overhead
	Valve, Air-Cooled, Gasoline, Vertical Shaft With Cast Iron Cylinder
	Sleeve, Oil Pump With Integral Oil Filter.
Model 451 5K:	15 HP Kohler Command 15, 4-Cycle, Single Cylinder, Overhead Valve,
	Air-Cooled, Gasoline, Pressure Lubricated, With Oil Filter, Vertical Shaft,
	Aluminum Head and Block with Cast-Iron Cylinder Liner.

STARTING SYSTEM:

TIRES:

RECOMMENDED TIRE PRESSURE:

CAPACITIES:

Electric by key switch operation with safety interlock blade drive.

Front	1 1 X 4.00 X 5 ribbed tread.
Rear	1 8 X 8.50 X 8 Multi-Trac
Front	16-21 Ibs.
Rear	8-1 4 Ibs.
Fuel	2.7 gallons total. Engine	Briggs

&Stratton - 1 .50 quarts oil. Kohler - 2 quarts oil with filter.

DIMENSIONS:	Width	44" Maximum Track Width
	Height	42" to top edge of seat. Length
	72" hitch tab to front bumper. Weight
	Power Unit: 463 Ibs. w/36" Deck:
	544 Ibs. w/42" Deck: 541 Ibs.
NOTE:	Additional information provided in service instructions under the individual component.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Page 8