CARE AND MAINTENANCE
OIL FILL:
1.Push the valve body in and twist into the detent notch.
2.Clean any spilled oil from engine and chassis.
3.Refill engine with type, and quantity of oil recommended by the engine manufacturer in engine literature.
NOTE: Oil changes require replacement of the oil filters. These filters can be obtained from your authorized engine dealer.
The use of any other oil filter may cause damage to the engine.
Model ZTR 4515B | Model ZTR 4515K |
Briggs & Stratton Oil Filter: P/N 492 932 | Kohler Oil Filter: P/N 52 050 02 |
PLEASE DISPOSE OF USED OILS AT PROPER COLLECTION CENTERS. -
PROTECT YOUR ENVIRONMENT-
LUBRICATION:
CHASSIS: LOCATIONS: | Number of grease zerks used: (4) |
SERVICE INTERVALS: | (1) each front wheel caster tube and each front wheel hub. |
RECOMMENDED GREASE: | Every 50 hours of operation |
| Name brand wheel bearing or |
|
|
| Lubricate each front wheel to allow even distribution of grease |
| within the wheel, rotate or spin each front wheel after (3) pumps |
| of the grease gun. Repeat process until the appearance of |
| grease is noted completely around each caster axle. |
Page 29
