SPECIFICATIONS

 

Model ZTR 5004/5005

CHASSIS:

11 GA - rectangular tube

BODY:

Two piece-made of rotational molded polyethylene. Front

 

body contains access panels for battery service & engine

 

to mower deck belt removal. Rear body tilts up to allow

 

service on the entire drive system.

SEAT:

Designed for operator comfort by use of high-density

 

closed cell foam padded back rest and arm rests,

 

upholstered with CorduraTM water-repellent fabric. Seat

 

is adjustable fore and aft.

MOWER DECK:

Two decks are available. The 42” is made of stamped

 

steel. The 50” is made of 11 GA fabricated welded

 

construction with external reinforcement ribs. Three

 

blades combine for either a 42” or 50” cut width. Cut

 

height approximately 1.5” to 4.5” via 7 position lift handle.

BLADE DRIVE:

Electric clutch

DRIVE SYSTEM:

Each rear wheel is independently driven by a HydroGear

 

BDU-10L Series 70 hydrostatic transmission. The hydrostatic

 

transmissions power a fully enclosed HydroGear gearbox.

ENGINE:

19HP Kawasaki overhead valves, replaceable oil filter, full

 

pressure lube system, dual element air cleaner, integral fuel

 

pump.

 

STARTING SYSTEM: Electric by key switch operation with safety interlocks on

 

parking brake and blade drive clutch.

TIRES:

Front

11 X 4 X 5 ribbed tread

 

Rear

20 X 10 X 8 Multi-Trac

RECOMMENDED

Front

16 - 21 lbs.

TIRE PRESSURE:

Rear

8 - 14 lbs.

CAPACITIES:

Fuel - 4.8 gallons total (dual tanks)

 

Oil tank - 3 quart with in-line 40 micron filter

 

Engine - 2 qts. SAE 30 (with filter)

DIMENSIONS:

Width

55” (42” Deck), 60” (50” Deck)

 

Height

45”

 

Length

72:

 

Weight

594 lbs, (42” Deck], 650 lbs (50” Deck)

Additional information provided in service instructions under the individual component.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

13

Page 13
Image 13
Dixon ZTR 5004, ZTR 5005 manual Specifications